Видео

Thanks 👍

Curious why you would use spacers instead of going with a wider wheel and tire?

Did you do anything else other than the lift blocks. Does it effect anything else. I have a 23 F350 and haul a 5th wheel. I like to go just 1 1/2 up. Any info would be appreciated. Thanks love your content

A real life test...no bs... thank you

Just went and traded my Rzr 800s and got the Hd10 defender limited 2 door,and OMG❤You can talk in the cab and no noise at all on my 2024 and the AC will freeze you out.Best riding Defender from factory to me👍

What size is your shop?

Your not supposed to use Eco Mode when pulling large loads.

Hey Rocky! Really enjoy your videos, and your attention to detail. I know you are busy, but would truly appreciate you opinion on lifting my 24 f250 lariat 7.3. Im honestly only looking to match the height of a tremor so im guessing 1.5-2 front lift and inch roughly in rear. Im scared to develop vibrations and shudders so want to be careful what i do. I ordered the hub to swap passenger side like you did. Rear i assume i will order tremor blocks and u bolts. Would really like to know what you would buy for the front to just gain 1.5-2 inches lift and maintain ride quality and reduce risk of issues. You seem particular like me, so opinion would be valued greatly. Thank you very much.

This is the kind of information I've been searching for! Thank you!!!

if those tires were on my 7.3, i won't even hear them... :)

Can you provide more details how you wired the radio and speakers and how they were wired from factory?

Have you had any trouble with your NPS 5500? Mine cut off the other night and I cannot get it to even start to try and crank. There is also no numbers on the LED hour meter. Any suggestions?

If you would have just went with 32" tires, do you think you'd still needed the clutch update?

Did the truck rub at all with just the 1” spacers?

Are those metal shavings an indication of your CP3 pump starting to have issues?

Did you have to change the rails, my 21 limited have different rails.

Really cool machine there! Where did you get the phone holder?

Very thorough & detailed video! Where did you get your get your carpet lined tool box? Thank you!

Thank you so much!!! The oil level was high on dipstick…. I took a turkey baster and removed 250 ml of oil!!! So I started up the Onan!!! And it works perfectly!!!!thank you!!!!!

Is this guy 4 foot tall?

I just want to run a window unit, fridge, deep freezer, some lights and fans. I think the 5000 will get the job done.

I'm running a GMC Sierra 2500HD Duramax Denali. Just installed these bags and the same compressor AirIQ HD2 Air Management. Picking it up tomorrow, can't wait. Nice truck Bro!

962 "LIKES" and 120 Comments! At what point does Cummins Onan fix the issue, after a class action lawsuit? Year old Onan 4000 on a horse trailer that is now doing the same thing after 50 hours, and the dealership preformed the first oil change. I doubt it is fuel or fuel pressure since I can prime it and the unit is about 10' above the fuel tank. I already removed half a pint and I am at the ADD mark, it still is shutting down. I guess tomorrow I'll pull another half pint out and see if it solved the issue. Sorry for this vent, but does any corporation in the RV or marine industry take ownership and responsibility? We ALL are spending a TON of our hard earned money for these toys, the least they can do is provide with products and support that works!!! I guess as long as the shareholders and investors are happy with quarterly and annual earnings that's all that really matters to them!!

Hey ty for help worked great. I have a forscan ? Due you know the procedure for making time adj on running boards 2024 f450

I have a couple of questions. First off, do you like the 1” or 2” spacers better? Second question, which thread pitch are you running? I have a 2022 F250 King Ranch and just ordered 37x13.50x20 Mud Grapplers. Currently have Toyo M/T but would like a the truck to look a little “beefier” without overdoing it

What's the name of it???

I’ll buy the mudd grap

near seen dual air bags

Did you leave the bumper spacers off?

Thank you for sharing!!! Getting ready to leave for 2 weeks and this happened to ours! You saved the day!❤😊

Can you back into your site without undoing the chains or do you have to loosen them first?

Hello i just purchased a 2017 1500 crew cab bighorn and it has a 8spd with 3.21 gear axle and i want to upgrade to 3.92 what would be your opion on a daily driver.

How do I know if my truck is 3.92 or 3.21?

If your Lippert SlimRack RV Slide breaks at the pin, here is a quick fix and heavy-duty upgrade: ruclips.net/video/qWJOrGu3Sws/видео.html

Man those tires on that truck would have to go. That road noise is insane.

Do you have any videos where you program a 2017 through 2019 super duty auto fold mirrors, I’m trying to figure out how to do it on my 2019 before I trade it in just to practice? My question is do I have to swap the pins out on 18 and 19 on both sides? I said it all up correctly, but they’re not folding when I close and they’re not opening when I press open? Any help would greatly be appreciated.. nobody on any of the Facebook forms can tell me or state whether it’s both windows that I need to switch the pins on or just the driver side. I know I got all the right numbers. Since I have a 4 button fob, I used the FC instead of F.

Did the Kodiak system electric over hydraulic on my toy hauler about 10 years ago, has work amazing.

Was the speedometer affected at all because of the larger tires?

Nice video and I wish I had a big building and some land like that❤❤

Ran into this exact issue recently, thank you for confirming the “over oiling” condition. I did the same thing using the dip stick to measure the oil level. Drained out the oil like you have it, and bingo, no issues. I appreciate it bud.

Great work got it done step by step 23 F250 Super with Carli 2.5 and 37s

Do u put the teflon in the filling part?

Very good info!

Your house is a lifestyle 👌 Inspires me to work hard

Any updates?

You CRUSHED this video, GREAT JOB!!!

Would you have the number for 35/12:50/17? I’m going to try and change the tire size on a 2024 F350 dually.

Rocky, I have been seeing people are saying not good for anything over 26 - 30 feet. How has it been with sway control? Thanks

Thanks for doing this great video! We shared it on the Inferno Cab Heaters Facebook page today.

Really nice, has it remained quite and do you still like it?